Restore

Hold Hoop

Hold Hoop is made up of left and right join after two and a half piece of anchorear involution, left and right half piece are in semicircle ring, the Hold Hoop bending outward on both ends of the half circle, which formed an installation ears, whose character is: described the left side of mounting ears open at the end of the piece of hoop embedded with groove, accordingly, its combination of right ear clamp under the corresponding installation set on a pin shaft, the right Hold Hoop end installed on the ear. The pin shaft is inserted into the slot on the ear at one end of the left half of the hoop.


Hold Hoop mainly plays the role of fixing or connecting all kinds of wire clips on the iron tower or pole. According to the characteristics of the line, the fixture has two kinds of rod and tower. The tower is made of metal splint U-shaped hoop, which can fix all kinds of wire clips on the tower without damaging the strength of the original tower. The rod is hoops.


Tension splints are used for corner towers or terminal towers to provide hanging points for ADSS cable erection. Straight line splint is used for straight line tower and U-shaped zinc-plated hold hoop to provide hanging point for ADSS cable erection.  The hoop is used to fix the hanging vertical wire on the rod and provide hanging point for ADSS cable erection.


In order to adapt to various roundness of the pier body, the hoop body should be used without the flexible hoop body of the ring stiffening, that is, the steel plate without the stiffening plate for the hoop body. In this way, when applying pre-tension, because the hoop body is flexible, it is easy to stick closely with the pier.


View as  
 
  • U-shaped Hold Hoop is a member of one material that holds or holds another material.It is a fastener. In the installation of a pipe, the collar is usually used to hold the pipe, and then the collar is fixed to a solid foundation to secure the pipe.The hoops are also useful in other installation projects, such as electric power engineering, where the hoops are used to fix the cross arm on the circular pole, and the cross arm bears the tension and tension of the wire.In short, a collar is a metal device used to hold the cylinder and secure the installation.

  • U-shaped Zinc-plated Hold Hoop is a parts that used to reduce the auto engine working noise , due to the length of the two pipe difference is equal to the car issued by half of the wave length, so that the two columns of sound waves in the overlap of interference offset each other and weaken the sound intensity, so that the sound reduction, so as to play the effect of silencer.

  • Welded Hold Hoop is a component that holds or hoops another material with one kind of material. Galvanized hoop is designed to connect the first hoop ring and the second hoop ring through the clamping block, dial block, spring, connecting column and clamping column installed at both ends of the first hoop ring, replacing the original bolt connection, simple operation, easy to use, greatly reducing the labor force of the staff.

  • Flat Bar Welded Hold Hoop is a component that holds or hoops another material with one kind of material. Galvanized hoop is designed to connect the first hoop ring and the second hoop ring through the clamping block, dial block, spring, connecting column and clamping column installed at both ends of the first hoop ring, replacing the original bolt connection, simple operation, easy to use, greatly reducing the labor force of the staff.

  • Hold hoop of silencer is a parts that used to reduce the auto engine working noise , due to the length of the two pipe difference is equal to the car issued by half of the wave length, so that the two columns of sound waves in the overlap of interference offset each other and weaken the sound intensity, so that the sound reduction, so as to play the effect of silencer.

  • Zinc-plated Hold Hoop is a parts that used to reduce the auto engine working noise , due to the length of the two pipe difference is equal to the car issued by half of the wave length, so that the two columns of sound waves in the overlap of interference offset each other and weaken the sound intensity, so that the sound reduction, so as to play the effect of silencer.

Buy Hold Hoop in bulk from our factory, we can give you discount and reasonable price. We have fully supply chains of Hold Hoop in stock. We provide quotations, welcome to wholesale and buy discount products made in China with cheap price from our factory called KaiLin Hardware, which is one of the manufacturers and suppliers from China and get CE. Besides, we supply you with price list, discount low price, even free sample. Our products are high quality, low price, latest selling, newest advanced, classy, most fashion, easy-maintainable, which has 2 years warranty. We have own factory, which has own brands. If you want to buy Hold Hoop, you can contact with us.
0086-0317-8776711
[email protected]